Original Publish Date : 2/17/2005
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
The mother-of-pearl growth surface of abalone shell (top) is colored because of how light refracts as it strikes tiny terraces of calcium carbonate. UCSD engineering researchers showed that the terraced, Christmas treelike surface of abalone shell has evenly spaced nucleation sites from which stacks of hexagonal tiles of calcium carbonate begin to grow. The top and bottom surfaces of each layer of tiles are separated by a protein adhesive, but the adhesive does not bind the edges of tiles to adjoining tiles. Under stress, tiles of calcium carbonate can slide, absorbing energy. Because of this microstructure, the abalone shell can absorb a great deal of energy without failing.
The mother-of-pearl growth surface of abalone shell (top) is colored because of how light refracts as it strikes tiny terraces of calcium carbonate. UCSD engineering researchers showed that the terraced, Christmas treelike surface of abalone shell has evenly spaced nucleation sites from which stacks of hexagonal tiles of calcium carbonate begin to grow. The top and bottom surfaces of each layer of tiles are separated by a protein adhesive, but the adhesive does not bind the edges of tiles to adjoining tiles. Under stress, tiles of calcium carbonate can slide, absorbing energy. Because of this microstructure, the abalone shell can absorb a great deal of energy without failing.
The mother-of-pearl growth surface of abalone shell (top) is colored because of how light refracts as it strikes tiny terraces of calcium carbonate. UCSD engineering researchers showed that the terraced, Christmas treelike surface of abalone shell has evenly spaced nucleation sites from which stacks of hexagonal tiles of calcium carbonate begin to grow. The top and bottom surfaces of each layer of tiles are separated by a protein adhesive, but the adhesive does not bind the edges of tiles to adjoining tiles. Under stress, tiles of calcium carbonate can slide, absorbing energy. Because of this microstructure, the abalone shell can absorb a great deal of energy without failing.

The mother-of-pearl growth surface of abalone shell (top) is colored because of how light refracts as it strikes tiny terraces of calcium carbonate. UCSD engineering researchers showed that the terraced, Christmas treelike surface of abalone shell has evenly spaced nucleation sites from which stacks of hexagonal "tiles" of calcium carbonate begin to grow. The top and bottom surfaces of each layer of tiles are separated by a protein adhesive, but the adhesive does not bind the edges of tiles to adjoining tiles. Under stress, tiles of calcium carbonate can slide, absorbing energy. Because of this microstructure, the abalone shell can absorb a great deal of energy without failing.


Apparently, engineering researchers at the University of California, San Diego do. They are using the shell of the red abalone, a seaweed eating snail, as a guide for developing bullet-stopping armor. The colorful oval shell of red abalone is highly prized as a source of nacre, or motherof-pearl, used in jewelry. But the UCSD researchers are most impressed by the shell's ability to absorb heavy blows without breaking.

Red abalone creates its helmetlike home with 95% calcium carbonate "tiles" and 5% protein adhesive. Calcium carbonate, or chalk, is ordinarily weak and brittle, but research has shown that the mollusk creates a highly ordered bricklike tiled structure that is the toughest arrangement theoretically possible.

Of course, abalone shell can't stop an AK47 bullet. But it looks more promising than laminates and other materials, which have been disappointing as armor. Researchers figure they have exhausted conventional possibilities, so they are turning to biology-inspired, or biomimetic, structures. Biomimetic researchers interested in tough materials have discovered that mollusk shells, bird bills, deer antler, animal tendon, and other biocomposite materials have recurring building plans that yield a hierarchy of structures from the molecular level to the macro scale.

Specifically, abalone shell at the nanoscale is made of thousands of layers of calcium carbonate "tiles," about 10 micrometers across and 0.5 micrometer thick, or about one-one hundredth the thickness of a strand of human hair. The irregular stacks of thin tiles refract light to yield the characteristic luster of mother-of-pearl.

A key to the strength of the shell is a positively charged protein adhesive that binds to the negatively charged top and bottom surfaces of the calcium carbonate tiles. The glue is strong enough to hold layers of tiles firmly together, but weak enough to let the layers slip apart, absorbing the energy of a heavy blow in the process. Abalones quickly fill in fissures within their shells that form due to impacts, and they also deposit "growth bands" of organic material during seasonal lulls in shell growth. The growth bands further strengthen the shells.

The adhesive properties of the protein glue, together with the size and shape of the calcium carbonate tiles, explain how the shell interior gives a little without breaking. In contrast, the whole structure is weakened when a conventional laminate material breaks.

The abalone shell investigation is one category of biomimetic projects at UCSD. Researchers there are also analyzing the strong, but extremely lightweight bill of the Toco Toucan, a bird that squashes fruit and berries with its banana-shaped bill, and new drug synthesis techniques that duplicate those of microorganisms.

Rate / Comment on this Article

Post a comment

PREVIOUS COMMENTS :
     
University research similar to that detailed in this article is generating considerable intellectual property (IP) that is regarded as bio-inspired and biomimetic. This IP information, directed at material science and engineering product innovation, is being consolidated daily in the resource BioParadigm ACCESS available from Biomimetic Connections, LLC. (www.biomimeticsregistry.net) Corporations active in biomaterial development (bone, dental, cartilage, tissue engineering/regeneration, wound healing, ..) and those active in optical, acoustical, mechanical, and intelligent software, systems and control engineering use BioParadigm ACCESS for in-licensing purposes.
BY: jpietrzyk1 - 10/4/2007 3:55:40 PM
HEV Experimentation & Assessment
The objective of the Hybrid Electric Vehicle Experimentation and Assessment (HEVEA) research program is to develop Hybrid Electric Vehicle (HEV) Fuel Economy and performance Test Operating Procedures (TOP), determine the fuel economy benefits of HEV using quantifiable test data; develop and validate TARDEC M&S models; and provide a tool to predict hybrid electric drive cycle performance and fuel...
TARDEC Hybrid Electric Humvee
TARDEC, working alongside DRS Technologies, has designed and developed a highly efficient, mobile power source demonstrator – the XM1124 Hybrid Electric Humvee. The HE Humvee is an advanced series hybrid electric vehicle that houses an engine/generator as the prime power source, a high voltage battery pack for short term load leveling and brake event energy storage, and has the ability to export...
Opposed Piston Opposed Cylinder Engine
An extremely lightweight opposed piston opposed cylinder (OPOC) engine has been developed under a Defense Advanced Research Projects Agency (DARPA) program. FEV and Advanced Propulsion Technologies (APT) were asked by the U.S. Army Tank Automotive Research Development and Engineering Center (TARDEC) to modify this engine for heavy-truck applications. Analyzing the two stroke scavenging, the side-injection...
Kinematically Redundant Robotics
The majority of robotics used in industry are in very structured environments. To program and teach a robot a specific task in industry, like spray painting an area, takes a significant amount of time. Dr. Anthony Maciejewski and his team of Randy Hoover and Shantell Hinton at Colorado State University are working on a way to not only automate the process but also to reduce configurations that create...
Evonik's Lotus Exige
How can cars be designed to be more attractive, more environmentally friendly, more efficient, and safer? These are questions that Evonik Industries has answers to. The car of the future doesn’t yet fly—but its lightweight construction owes something to aircraft design anyway. The rear spoiler of a RED Motorsport Lotus Exige weighs next to nothing, thanks to ROHACELL, an extremely rigid, but lightweight,...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Where are the Lighting/lamp engineers and designers?
Can anyone recommend the best sources and schools for sourcing engineers for my company? We are the largest provider of lighting solutions globally and...

Torque for cube
What would be the torque requirement for 4000 pounds cuboid measuring 36 inches each side? This cuboid has to be rotated at 0.5 rpm. The axis passes through...

How can America get the manufacturing back from China ?
your view is side very much. usa is still a big manufacture country in the world which has high tech manufacture, but china or some asia countries only...

Inventor question: FEA
Thanks guys for your comments.  Since my last posting, I have gotten AutoDesk INVENTOR FEA to work (version 2008 professional). Now there are...

Inventor seeking machinist
I have no idea what I'm looking for.  I designed a system that makes flipbooks from video that uses a business card slitter as part of the system.  There...