Product Spotlight: Adhesive-Delivery System
The ADS1 DynaFill adhesive delivery system eliminates the need to manually fill adhesive tank hoppers and minimizes adhesive contamination by reducing adhesive exposure to the environment.
Gradually adding adhesive to
the tank hopper also stabilizes the heat
in the system for cleaner operation. The
system integrates into, and is compatible
with, most adhesive-application equipment.
The inlet cover fits directly on the hotmelt
unit’s adhesive tank hopper.
The self-contained system operates on
20 cfm at 50 psi and automatically draws
and transfers adhesive to the tank hopper when the
level falls to a preset minimum. Adhesive is drawn
through a suction wand immersed in the adhesive
bin and delivered under positive pressure to the
tank hopper. A vibrator on the wand keeps
the adhesive flowing freely. A capacitive
sensor immersed in the tank hopper
senses when the adhesive level is low and
responds by transmitting a signal to draw
adhesive through the wand and transfer it to the hopper.
The sensor shuts off the flow when the tank hopper is full.
The system feeds a hot-melt unit up to 22 ft vertically
and 100 ft horizontally.
ITW Dynatec
31 Volunteer Dr.
Hendersonville, TN
37075
(800) 860 6150
itwdynatec.com