Original Publish Date : 2/4/2008
Leland Teschler's Editorial: Automakers are Now Officially in the Green Camp
Those of us who have attended the big Detroit auto show a few times have come to know the drill characterizing the typical introduction of a new model to the press.

— Leland Teschler, Editor

A high honcho from the automaker’s management team first trots out on stage and utters a few platitudes about listening to the market. The vehicle emerges from under a sheet or, to heighten the drama, gets driven out of artificial fog. Then the show centers on Hans, the exterior stylist, and his sidekick Sven who was in charge of interior design. For several minutes they wax poetic about the emotional impact of the body lines and the colors of the interior.

Unless the new vehicle is something along the lines of a Dodge Viper, you must listen closely to catch any mention of what’s in the powertrain.

All this changed last month in Detroit. Hans and Sven were still in evidence, but they were almost an afterthought. The new message hammered home by one automaker after another: “We’ve got a green powertrain.”

Every concept car to emerge from underneath the sheets or out of the artificial fog rode on some sort of plug-in hybrid power. But these plug-in hybrid schemes are all at least two years away from being practical. New models set to arrive on showroom floors this year get green credentials from the fuels they burn. They are either mixedmode hybrids like the Prius, diesels, or they incorporate a more fuel-miserly ignition scheme and can burn ethanol. Even new Hummers will be running on biofuel.

Automakers can be excused for falling all over themselves to sound green. It seems that, at last, fuel economy has become a selling point for new vehicles. But this exuberance also led to some odd pronouncements at the Detroit show. One of them came from Toyota. The world’s largest automaker had taken flak for lobbying against CAFE standards that would have impeded its ability to sell trucks here. At the show, however, a Toyota executive claimed it was high time CAFE standards were tightened.

The most bizarre, though, came from General Motors. GM CEO Rick Wagoner announced a partnership between the automaker and Coskata Inc., an ethanol producer. As he described Coskata’s process, Wagoner phrased his announcement as though the company had repealed the laws of thermodynamics. “For every unit of energy that the Coskata process uses,” said Wagoner, “it creates up to 7.7 times that amount of energy.”

I thought Wagoner’s statements about Coskata’s technology were confusing, so much so that I grabbed a GM research chief afterwards and asked her what in the world Wagoner had meant. We filmed her answer and you can see it in a video posted on EngineeringTV.com.

You’ll be happy to know that GM hasn’t really overturned the work of Lord Kelvin, though I’m still not sure Wagoner understands that. But at least the automaker didn’t rely on fake fog to get its point across about green powertrains.

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Jamison RFID Portals
Jamison's Industrial Portals Division produces heavy-duty RFID portals that are custom designed enclosures that help track products during the manufacturing process and throughout the entire supply chain. Industrial Portals design allows users to easily install and integrate any RFID hardware/software systems with dramatically lower costs than other systems.
Higgs-3 Integrated Circuit
The Alien Technology Higgs is a family of highly integrated single chip UHF RFID Tag ICs. The chips conform to the EPCglobal Class 1 Gen 2 specifications and provide state-of-the-art performance for a broad range of UHF RFID tagging applications. Higgs-3 builds on that performance foundation by offering enhanced authentication and security capabilities along with extended memory and EPC number features....
Alien Technology RFID
As RFID expands into more applications, the simple knowledge that a given tag was seen at a certain read point is sometimes inadequate. For some applications we’d like to know more. Was the tag moving or stationary? Which direction? How fast? How far away? Alien Technology's new Intelligent Tag Radar (ITR) provides this and other information about the tag. This capability enables the RFID...
New Analog to Digital Converter Technology
From the labs at Analog Devices comes a new technology in analog to digital converter technology that is the culmination of three years work. In this episode, Bill Scofield, Design Group Leader, explains the new continuous time sigma delta converter that uses an internal loop filter with no switch capacitor sampler section.
RFID "Sniffer" Architecture
As RFID adoption continues to grow, engineers are faced with an increasing need to validate tags both for interoperability with products from other vendors and for conformance with the specified protocol. The "sniffer" RFID tag test system uses a vector signal analyzer to “sniff” the air interface between an interrogator and a tag. This system uses a reference “gold” reader or RFID simulator...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Halbach Array Motor : Manufacturer or maker information
Hi dwaris, We are interested in your design. We can offer the manafacturing service for you. You can know a little information about us from our website:...

Where are the Lighting/lamp engineers and designers?
Are you looking for some Industrial deisgners? We have got good experience in designing lamps using latest LED technology. You can contact me if you haven't...

Making metallic objects when only a physical part is available
Hi Leslie: If the object is small, I wonder if the dental industry might suggest a solution.  I worked as a dental tech and we used the icky polymer...

Trustworthy engineer needed
Hi,Did you find the resource? 

Lead shot making
I have been using liquid laundry detergent as a coolant and having grate success. The one I use is the cheapest that can be found and it is from the dollar...