Original Publish Date : 4/7/2008
Leland Teschler's Editorial: How Not to Make Engineering Appeal to Kids
Programs that introduce engineering to school children make headlines today.

Project Lead the Way, Childhood Design & Engineering, and other efforts are noble attempts to show youngsters what engineering can be like.

I have some advice for people trying to give kids the idea that engineering can be cool: Remember that your audience is naive about most things technical. This chestnut of wisdom is based on my own experience attending a similar program by the Society of Automotive Engineers. Back in the 1960s, the SAE invited my science class to visit a company supplying manufacturing equipment to automakers.

The organizers certainly had the best of intentions. But you need to understand what that visit was like from the viewpoint of a junior-high schooler. Picture in your mind TV’s South Park kids turned loose in a factory. That day, we were just as clueless as those cartoon characters.

My dimming recollection of the trip is one of being bored to tears with most of it. We started with an introduction from a high-level manager who tried to explain what the plant did. He lost all of us completely after two sentences. What followed was the slowest half hour of my short life as he droned on oblivious to his listeners all looking down at their shoes.

Next came a tour of the factory. The guy who to ok us through talked a lot. None of it made any sense to us. The only real knowledge we came away with was that factories are dark, grimy places full of machinery and noise.

Finally we visited with what I thought were a bunch of engineers. I didn’t figure out who they really were until I was in my own career: These were draftsmen. For years after that, I thought engineers spent most of their time at drafting boards.

I am not sure we ever really met a practicing engineer that morning. But there wouldn’t have been much to see —little more than someone at a desk with a few open catalogs and a slide rule.

Things picked up a bit after we left the factory to go downtown where we sat in on an SAE function. One of the speakers was the recipient of SAE’s Outstanding Young Engineer Award, an honor the organization still gives out today. None of my group got much out of what he said. But he was the youngest person we’d seen that day in a suit, and the only one we’d seen with a beard.

At least to my young mind, he made a good impression, even if I couldn’t understand what he was saying. I wished we could have spent more time listening to him instead of to the mind-numbing presentations we’d gotten.

Thankfully, most programs introducing kids to technology today use a lot more creativity than the modest endeavors of four decades ago. And they build in more time with people like SAE’s Outstanding Young Engineer. In my case, it would be accurate to say I pursued an engineering career despite the SAE’s inadvertent attempt to convince me it was a boring field.

— Leland Teschler

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Jamison RFID Portals
Jamison's Industrial Portals Division produces heavy-duty RFID portals that are custom designed enclosures that help track products during the manufacturing process and throughout the entire supply chain. Industrial Portals design allows users to easily install and integrate any RFID hardware/software systems with dramatically lower costs than other systems.
Higgs-3 Integrated Circuit
The Alien Technology Higgs is a family of highly integrated single chip UHF RFID Tag ICs. The chips conform to the EPCglobal Class 1 Gen 2 specifications and provide state-of-the-art performance for a broad range of UHF RFID tagging applications. Higgs-3 builds on that performance foundation by offering enhanced authentication and security capabilities along with extended memory and EPC number features....
Alien Technology RFID
As RFID expands into more applications, the simple knowledge that a given tag was seen at a certain read point is sometimes inadequate. For some applications we’d like to know more. Was the tag moving or stationary? Which direction? How fast? How far away? Alien Technology's new Intelligent Tag Radar (ITR) provides this and other information about the tag. This capability enables the RFID...
New Analog to Digital Converter Technology
From the labs at Analog Devices comes a new technology in analog to digital converter technology that is the culmination of three years work. In this episode, Bill Scofield, Design Group Leader, explains the new continuous time sigma delta converter that uses an internal loop filter with no switch capacitor sampler section.
RFID "Sniffer" Architecture
As RFID adoption continues to grow, engineers are faced with an increasing need to validate tags both for interoperability with products from other vendors and for conformance with the specified protocol. The "sniffer" RFID tag test system uses a vector signal analyzer to “sniff” the air interface between an interrogator and a tag. This system uses a reference “gold” reader or RFID simulator...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Halbach Array Motor : Manufacturer or maker information
Hi dwaris, We are interested in your design. We can offer the manafacturing service for you. You can know a little information about us from our website:...

Where are the Lighting/lamp engineers and designers?
Are you looking for some Industrial deisgners? We have got good experience in designing lamps using latest LED technology. You can contact me if you haven't...

Making metallic objects when only a physical part is available
Hi Leslie: If the object is small, I wonder if the dental industry might suggest a solution.  I worked as a dental tech and we used the icky polymer...

Trustworthy engineer needed
Hi,Did you find the resource? 

Lead shot making
I have been using liquid laundry detergent as a coolant and having grate success. The one I use is the cheapest that can be found and it is from the dollar...