Original Publish Date : 5/6/2008
Assault and Batteries
Researchers at Sandia National Laboratories must hate batteries: They heat them to extreme temperatures, overcharge them, drive nails into them, and generally do whatever they can to destroy them.

The torture tests are part of the DOE-funded FreedomCAR program that is testing lithium-ion batteries for hybrid electricgasoline vehicles and plug-in hybrids.

Current hybrid vehicles run on gasoline and use nickel-metal hydride batteries to store energy for the electric motor. FreedomCAR hopes to replace those batteries with lithiumion versions that have six times the energy density of lead-acid batteries and two to three times the energy density of nickel-metal hydride batteries.

“Lithium-ion batteries in laptops and power tools have greatly improved over the past few years,” says Peter Roth, lead researcher for Sandia’s FreedomCAR battery efforts. “In fact, they have improved so much that we expect to see them in hybrids later this year and possibly in short-range plug-in hybrids within two years.”

The researchers test batteries to determine when and how they can fail or leak. They also study the stability of the materials, flameretardance, high-temperature integrity of separators between the cathode and anode, and other thermophysical properties.

Roth says some of the newer batteries, like the new lithium/ iron phosphate versions in hand-held power tools, are extremely resilient and less reactive when subjected to extreme conditions. Industry experts predict that plug-ins that can run 10 miles using only electricity are two to three years away while plug-ins that can run 40 miles are three to four years away.

The first hybrids using lithiumion batteries will be on the market later this year when Mercedes- Benz launches the S400 BlueHybrid. After that, it will launch the S300 Bluetec Hybrid, a diesel car with a lithium-ion battery. General Motors plans to introduce a 40-mile plug-in hybrid electric vehicle with lithium-ion batteries in 2010.

Click on any of the images below for a full-size view :

Rate / Comment on this Article

Post a comment

PREVIOUS COMMENTS :
     
The online caption reads. "Sandia researcher Peter Roth prepares to blow up". I hope Peter survived and is well.
BY: Mike.Frain - 10/12/2008 11:49:22 AM
Jamison RFID Portals
Jamison's Industrial Portals Division produces heavy-duty RFID portals that are custom designed enclosures that help track products during the manufacturing process and throughout the entire supply chain. Industrial Portals design allows users to easily install and integrate any RFID hardware/software systems with dramatically lower costs than other systems.
Higgs-3 Integrated Circuit
The Alien Technology Higgs is a family of highly integrated single chip UHF RFID Tag ICs. The chips conform to the EPCglobal Class 1 Gen 2 specifications and provide state-of-the-art performance for a broad range of UHF RFID tagging applications. Higgs-3 builds on that performance foundation by offering enhanced authentication and security capabilities along with extended memory and EPC number features....
Alien Technology RFID
As RFID expands into more applications, the simple knowledge that a given tag was seen at a certain read point is sometimes inadequate. For some applications we’d like to know more. Was the tag moving or stationary? Which direction? How fast? How far away? Alien Technology's new Intelligent Tag Radar (ITR) provides this and other information about the tag. This capability enables the RFID...
New Analog to Digital Converter Technology
From the labs at Analog Devices comes a new technology in analog to digital converter technology that is the culmination of three years work. In this episode, Bill Scofield, Design Group Leader, explains the new continuous time sigma delta converter that uses an internal loop filter with no switch capacitor sampler section.
RFID "Sniffer" Architecture
As RFID adoption continues to grow, engineers are faced with an increasing need to validate tags both for interoperability with products from other vendors and for conformance with the specified protocol. The "sniffer" RFID tag test system uses a vector signal analyzer to “sniff” the air interface between an interrogator and a tag. This system uses a reference “gold” reader or RFID simulator...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Halbach Array Motor : Manufacturer or maker information
Hi dwaris, We are interested in your design. We can offer the manafacturing service for you. You can know a little information about us from our website:...

Where are the Lighting/lamp engineers and designers?
Are you looking for some Industrial deisgners? We have got good experience in designing lamps using latest LED technology. You can contact me if you haven't...

Making metallic objects when only a physical part is available
Hi Leslie: If the object is small, I wonder if the dental industry might suggest a solution.  I worked as a dental tech and we used the icky polymer...

Trustworthy engineer needed
Hi,Did you find the resource? 

Lead shot making
I have been using liquid laundry detergent as a coolant and having grate success. The one I use is the cheapest that can be found and it is from the dollar...