Original Publish Date : 4/7/2008
Leland Teschler's Editorial: How Not to Make Engineering Appeal to Kids
Programs that introduce engineering to school children make headlines today.

Project Lead the Way, Childhood Design & Engineering, and other efforts are noble attempts to show youngsters what engineering can be like.

I have some advice for people trying to give kids the idea that engineering can be cool: Remember that your audience is naive about most things technical. This chestnut of wisdom is based on my own experience attending a similar program by the Society of Automotive Engineers. Back in the 1960s, the SAE invited my science class to visit a company supplying manufacturing equipment to automakers.

The organizers certainly had the best of intentions. But you need to understand what that visit was like from the viewpoint of a junior-high schooler. Picture in your mind TV’s South Park kids turned loose in a factory. That day, we were just as clueless as those cartoon characters.

My dimming recollection of the trip is one of being bored to tears with most of it. We started with an introduction from a high-level manager who tried to explain what the plant did. He lost all of us completely after two sentences. What followed was the slowest half hour of my short life as he droned on oblivious to his listeners all looking down at their shoes.

Next came a tour of the factory. The guy who to ok us through talked a lot. None of it made any sense to us. The only real knowledge we came away with was that factories are dark, grimy places full of machinery and noise.

Finally we visited with what I thought were a bunch of engineers. I didn’t figure out who they really were until I was in my own career: These were draftsmen. For years after that, I thought engineers spent most of their time at drafting boards.

I am not sure we ever really met a practicing engineer that morning. But there wouldn’t have been much to see —little more than someone at a desk with a few open catalogs and a slide rule.

Things picked up a bit after we left the factory to go downtown where we sat in on an SAE function. One of the speakers was the recipient of SAE’s Outstanding Young Engineer Award, an honor the organization still gives out today. None of my group got much out of what he said. But he was the youngest person we’d seen that day in a suit, and the only one we’d seen with a beard.

At least to my young mind, he made a good impression, even if I couldn’t understand what he was saying. I wished we could have spent more time listening to him instead of to the mind-numbing presentations we’d gotten.

Thankfully, most programs introducing kids to technology today use a lot more creativity than the modest endeavors of four decades ago. And they build in more time with people like SAE’s Outstanding Young Engineer. In my case, it would be accurate to say I pursued an engineering career despite the SAE’s inadvertent attempt to convince me it was a boring field.

— Leland Teschler

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Ultra-Thin Imagers
In Part 2 of Engineering TV's interview with Eric Tremblay, researcher at the UCSD Jacobs School of Engineering, Eric discusses the Montage, a new camera design derived from a "slice" of the original full aperture symmetric lens, which features a much greater depth of field and a USB interface, all in a package about the size of a domino. "This type of miniature camera is very promising...
Origami Optics
Most camera lenses refract light, leading to the familiar cylindrical tube geometry. In some cases, where extended focal length or reduced track length are required, concentric mirrors can be used to effectively reduce barrel length. Recent advances in diamond machining and image processing make it possible to take this approach to a new extreme. With up to 8 reflections, large ray angles, and...
PT-50 Turboshaft Engine
The Turbine Technologies PT-50 turboshaft engine offers a new heavy fuel solution for UAV’s requiring a 50 HP class engine. With its minimal volume and a complete flight ready weight of only 30.6 pounds, the engine exhibits excellent power density. The free power turbine design entails three primary sections: a gasifier core, an accessory section and a power module. The gasifier core contains a...
Aerospace Engineering Controls Lab
The aerospace engineering and engineering mechanicals undergraduate controls laboratory at the University of Texas, Austin, is open to juniors and seniors who have completed a feedback controls systems course and are ready to apply their understanding of classical and state space control theory in the lab. University of Texas Lecturer and Principle Engineer of Controls and Simulation at National Instruments,...
Inkjet Material Deposition System
The MDS 300 is an ultra high precision Materials Deposition System. It enables digital deposition of a wide range of fluids utilizing inkjet printhead technology. The MDS 300 allows the ultimate flexibility in printing capabilities. Users can input print resolution, print speed, printhead separation and curing processes. It can be utilized in both R&D and pilot line production applications....
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Hydraulic Pump design
Hi, Specify Gear , Vane Piston or others. Nahum Goldenberg info@hydrocad.com

Mass-Transit Myths
It should be noted, Hong Kong = very high population density, very high job density. So not a surprise that mass transit is very convenient there.

What’s Tough About Training
This issue’s emphasis on motion control prompts some reflection on how people learn about motion technology. Often theoretical training isn’t...

What’s hot? Not ethanol
This special issue looks at some of the technologies and industrial themes that are eliciting a lot of interest in the technical community. But...

We Don’t Know How to Recreate Silicon Valley
Preseason football is on TV, the kids are getting ready for the school year, and theme parks are anticipating their final Labor Day crowds. It...