New Product: 16-Channel USB DAQ Uses BNCs
Based on the USB-1616HS Series, the USB-1616HSBNC 1 Msample/sec, 16-bit USB data-acquisition device provides the added security and convenience of BNC connectors on its differential analog inputs.
A low-latency, highly deterministic control
output mode operates independently of the PC to
let the digital, analog, and timer outputs respond
to analog, digital, and counter inputs as fast as
2 μsec; at least 1,000 faster than PC-based USB
DAQ products. Seven programmable input ranges
span ±100 mV to ±10 V, full scale. An oversampling
mode includes line-cycle rejection for low-level
voltage measurements in the presence of ac-powerline
noise. A 37-pin D-sub connector provides two
16-bit, 1-Msample/sec analog outputs and 16 digital
I/O with a 4-MHz sample/update rate. Four counter
inputs measure frequency, period, pulse width, or
quadrature encoders up to 20 Msamples/sec.
Measurement Computing Corp.
10 Commerce Way
Norton, MA 02766
(508) 946-5100
mccdaq.com