Original Publish Date : 10/7/2008
Leland Teschler's Editorial: Not that hard to learn
Here’s a frustration that’s particularly common among engineers and engineering students: It sometimes seems impossible to learn fast enough.

So our first annual How-To issue seems like a good time to examine whether there’s a trick to picking up a skill quickly. And as it turns out, there is.

Meet Kent Johnson. He started a school in Seattle called the Morningside Academy. Many of its students have learning disabilities. So it is noteworthy that Morningside students advance in the skills where they have their greatest deficits by about 2.4 grade levels annually.

Morningside’s methods don’t just work with kids. In one case, academically deficient adults improved by two academic grade levels after about 18 hours of Morningside-inspired coaching.

The secret sauce that makes these results possible is a combination of two techniques that are generally absent from conventional schools: direct instruction and precision teaching. Direct instruction centers on brief sessions of learning in small steps. Precision teaching comes into play after a direct-instruction session. Here students practice repeatedly using the material they’ve just learned, accompanied by measurements of their accuracy and speed.

Morningside students don’t just learn material, they “overlearn” it to the point of fluency: being able to respond accurately and fast. Nor can they proceed to the next task until they hit this high level of performance. The point of the exercise: Perform at a fluent rate, and you can retain the information for years even without using it regularly.

So what does a Morningside classroom look like? “It is a noisy, active place,” says Morningside Principal Joanne Robbins. “Instruction is designed so people will be correct, so you hear a lot of accurate responsing. You also see a lot of partnered work and peer tutoring. Timers go off to mark the start and end of segments, and people give each other feedback after every few minutes, so the whole room is very active.”

Don’t get the idea that Morningside’s approach only works with small groups. “When you peer tutor, you multiply the number of teachers you have,” says Robbins. “We carefully teach how to partner and show students how to listen to one another. We can go as high as 50 pupils in a room with tremendous success.”

Morningside has been teaching this way since 1980. Its methods have worked not just with the learning disabled, but also with nursing students, college kids, and youths on academic probation. Clearly its techniques are effective and have stood the test of time. So why don’t other schools mimic its practices?

“That’s a delicate question,” admits Robbins. “Part of it may be that people are not familiar with the procedures….We also have a fundamental difference in philosophy [with other educators] that everyone can learn efficiently. And it requires great dedication.”

So it is unlikely you’ll find Morningside’s techniques in other institutions. But you can apply them yourself, says Robbins. Her advice: “Set a goal and collect data about how you’re doing. Be a good observer, a good cheerleader, and keep a positive attitude. Though it can get complicated, you can make progress quickly if you set small, attainable goals you can reach in a predictable amount of time.”

— Leland Teschler, Editor

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Jamison RFID Portals
Jamison's Industrial Portals Division produces heavy-duty RFID portals that are custom designed enclosures that help track products during the manufacturing process and throughout the entire supply chain. Industrial Portals design allows users to easily install and integrate any RFID hardware/software systems with dramatically lower costs than other systems.
Higgs-3 Integrated Circuit
The Alien Technology Higgs is a family of highly integrated single chip UHF RFID Tag ICs. The chips conform to the EPCglobal Class 1 Gen 2 specifications and provide state-of-the-art performance for a broad range of UHF RFID tagging applications. Higgs-3 builds on that performance foundation by offering enhanced authentication and security capabilities along with extended memory and EPC number features....
Alien Technology RFID
As RFID expands into more applications, the simple knowledge that a given tag was seen at a certain read point is sometimes inadequate. For some applications we’d like to know more. Was the tag moving or stationary? Which direction? How fast? How far away? Alien Technology's new Intelligent Tag Radar (ITR) provides this and other information about the tag. This capability enables the RFID...
New Analog to Digital Converter Technology
From the labs at Analog Devices comes a new technology in analog to digital converter technology that is the culmination of three years work. In this episode, Bill Scofield, Design Group Leader, explains the new continuous time sigma delta converter that uses an internal loop filter with no switch capacitor sampler section.
RFID "Sniffer" Architecture
As RFID adoption continues to grow, engineers are faced with an increasing need to validate tags both for interoperability with products from other vendors and for conformance with the specified protocol. The "sniffer" RFID tag test system uses a vector signal analyzer to “sniff” the air interface between an interrogator and a tag. This system uses a reference “gold” reader or RFID simulator...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Halbach Array Motor : Manufacturer or maker information
Hi dwaris, We are interested in your design. We can offer the manafacturing service for you. You can know a little information about us from our website:...

Where are the Lighting/lamp engineers and designers?
Are you looking for some Industrial deisgners? We have got good experience in designing lamps using latest LED technology. You can contact me if you haven't...

Making metallic objects when only a physical part is available
Hi Leslie: If the object is small, I wonder if the dental industry might suggest a solution.  I worked as a dental tech and we used the icky polymer...

Trustworthy engineer needed
Hi,Did you find the resource? 

Lead shot making
I have been using liquid laundry detergent as a coolant and having grate success. The one I use is the cheapest that can be found and it is from the dollar...