USAF
After printing various parts with AF-9628 powder, Air Force scientists analyzed the resulting parts’ porosity, strength, and impact toughness. The mechanical properties were good, researchers did not see cracking, and the parts were similar to traditionally manufactured parts. The parts even matched the required 10% elongation, indicating increased strength without becoming brittle.
After printing various parts with AF-9628 powder, Air Force scientists analyzed the resulting parts’ porosity, strength, and impact toughness. The mechanical properties were good, researchers did not see cracking, and the parts were similar to traditionally manufactured parts. The parts even matched the required 10% elongation, indicating increased strength without becoming brittle.
After printing various parts with AF-9628 powder, Air Force scientists analyzed the resulting parts’ porosity, strength, and impact toughness. The mechanical properties were good, researchers did not see cracking, and the parts were similar to traditionally manufactured parts. The parts even matched the required 10% elongation, indicating increased strength without becoming brittle.
After printing various parts with AF-9628 powder, Air Force scientists analyzed the resulting parts’ porosity, strength, and impact toughness. The mechanical properties were good, researchers did not see cracking, and the parts were similar to traditionally manufactured parts. The parts even matched the required 10% elongation, indicating increased strength without becoming brittle.
After printing various parts with AF-9628 powder, Air Force scientists analyzed the resulting parts’ porosity, strength, and impact toughness. The mechanical properties were good, researchers did not see cracking, and the parts were similar to traditionally manufactured parts. The parts even matched the required 10% elongation, indicating increased strength without becoming brittle.

Air Force Develops Steel Alloy for 3D Printing

Aug. 22, 2019
This low-cost alloy could be used for aerospace parts.

A steel alloy developed at the Air Force Research Laboratory, called AF-9628, has the strength and toughness needed for aerospace parts. The alloys costs less than some other high-performance steel alloys, including Eglin Steel and HP-9-4-20; however, it is more expensive than common grades used in conventional munitions. AF-9628 is unique in that it does not contain tungsten, which is  found in Eglin Steel, or cobalt, which is  found in HP-9-4-20.

The lab determined that AF-9628 is a good material for additive manufacturing due to its high strength. The lab tested the alloy using a powder bed fusion 3D printing machine. The AF-9628 powder melted predictably in the machine and finished parts met benchmarks for  porosity, strength, and impact toughness right out of the machine. No post-processing was needed.

Many  tested alloys don’t take to additive manufacturing very well, according to the researchers. For example, certain alloys will not melt and then crack a lot once you actually try to make a part.

The researchers first created simple parts, then complex designs including several intricate projectiles. They then used two machines and printed about 130 articles, including 30 small cylinders, 60 larger cylinders, 20 tensile bars, and 20 impact specimens.

For now, the AF-9628 powder is only available in small production quantities and companies can take months to formulate it. As such, while AF-9628 is a less-expensive steel, the powder form does not result in the same cost savings since the demand is low. The AF researchers hope this early success will lead to increased interest in high-strength steels. There’s not a lot of steels research and ongoing studies involve mostly titanium and composites.

Sponsored Recommendations

NEW Low Profile, Ultra Compact Power Supplies

March 13, 2024
Learn more HERE about Altech's Power supplies!

Altech's Liquid Tight Strain Relifs Catalog

March 13, 2024
With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure...

Industrial Straight-Through Cable Gland

March 13, 2024
Learn more about Altech's cable glands and all they have to offer for your needs!

All-In-One DC-UPS Power Solutions

March 13, 2024
Introducing the All-In-One DC-UPS, a versatile solution combining multiple functionalities in a single device. Serving as a power supply, battery charger, battery care module,...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!