Additive/3D Printing

FAQ's on Fused Deposition Modeling (FDM)

July 13, 2015

Sponsored by Stratasys Direct Manufacturing

What are the best applications for FDM and what materials can it use? Do shrinkage and warping present problems with FDM parts? Can engineers design FDM parts with threads? Can FDM parts be post processed?

Download FAQ's on Fused Deposition Modeling (FDM) to get the answers to these questions and more.

Continue Reading

A New Way to Break Down Polystyrene and Clean up the Environment

13 Challenges When Applying Scrum to Hardware Design

Sponsored Recommendations

Master LOTO Safety: Protect Your Team

June 27, 2025

Ensure workplace safety and compliance with our comprehensive Lockout/Tagout (LOTO) Safety Training course. Learn critical procedures to prevent serious injuries.

Engineering Safety: Best Practices for a Safer Workplace

June 27, 2025

Join our expert webinar to discover essential safety control measures and best practices for engineering a truly safe and compliant industrial environment.

The Flying Swiss Army Knife

June 25, 2025

An innovative aircraft with electric drives combines the best of both worlds. The cross between drone and helicopter could mean significantly faster and more efficient air emergency...

Technical Ceramics: Harder Than Steel

June 25, 2025

Effective when other materials fail, ceramics are particularly suitable for applications requiring wear and chemical resistance, sliding characteristics or biocompatibility. Discover...