Automation & IIoT

Intermediate drive conveyor

Oct. 11, 2007

The Intermediate Drive Conveyor in the Designer System conveyor line requires only a 26-in. straight section and lets users determine gearmotor placement.

Staff

The Low-Profile Idler, with a nose diameter of only 3.5 in., often eliminates the need for transfers, even for products as small as 4 in. When used with an intermediate drive, these idlers may be used at both ends of a conveyor.

SpanTech LLC, Box 369, 1115 Cleveland Ave., Glasgow, KY 42142, (270) 651-9166, spantechllc.com

Intermediate Drive Conveyor

Continue Reading

Multi-axis load cells measure force and torque in six dimensions

Power and efficiency drive motor selection

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024

Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024

Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024

As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.