Stealing data from laptops with a can of air

Feb. 25, 2008
Turns out you can read out the contents of DRAM from a laptop for anywhere from a few seconds to a few minutes after the machine is off. Blasting the chips with the contents of a compressed air can slows the rate at which data decays. Of course, you need ...

Turns out you can read out the contents of DRAM from a laptop for anywhere from a few seconds to a few minutes after the machine is off. Blasting the chips with the contents of a compressed air can slows the rate at which data decays. Of course, you need access to the machine either while it is on or shortly after it has been turned off for his scam to work. The encrypted data on disk drives is also at risk with the right techniques, as the video on this pages shows.

http://chronicle.com/wiredcampus/article/2764/with-a-can-of-air-hackers-can-steal-encrypted-data-from-laptops?utm_source=at&utm_medium=en

About the Author

Lee Teschler | Editor

Leland was Editor-in-Chief of Machine Design. He has 34 years of Service and holds a B.S. Engineering from the University of Michigan, a B.S. Electrical Engineering from the University of Michigan;, and a MBA from Cleveland State University. Prior to joining Penton, Lee worked as a Communications design engineer for the U.S. Government.

Sponsored Recommendations

March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...
March 31, 2025
Discover the world of maxon drive technology: motors, gearheads, sensors, controllers, and accessories. Configure your drive system online, including all relevant product and ...
March 31, 2025
Share current page XSun designs and manufactures a drone that is both energy-independent and can make its own decisions, for fully-automated missions. The company needed reliable...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!