Industry 4.0 Changes Selection Criteria For Machine Control Architecture

June 21, 2022

This white paper seeks to dive into the differences between PLC, PAC and IPC based machine controls, while also exploring how Industry 4.0 changes the requirements for a valuable machine control architecture.

This white paper seeks to demonstrate why IPC now prevails over PLC and PAC for Machine Control, and how the IPC now offers, by far, the best machine control architecture compared to PLC or PAC in the Industry 4.0 era.

This content is sponsored by:

Continue Reading

Multi-axis load cells measure force and torque in six dimensions

Power and efficiency drive motor selection

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024

Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024

Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024

As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024

Read exciting stories about all aspects of maxon drive technology in our magazine.