Machine Tools That are Cooled Last Up to Twice as Long as Non-Cooled Tools

June 2, 2009
Machine tools that are cooled last up to twice as long as non-cooled tools

Keeping machine tools cool can double their life, according to researcher Rado Gazo at Purdue University.

Gazo discovered that cryogenically treating tungsten-carbon router bits, as well as cooling them while they cut, boosted their operational lives, in some cases doubling them. The bits used cobalt as a glue to hold the tungsten and carbide molecules together. Friction heats the bit during cutting, causing a chemical reaction in which the cobalt melts and evaporates. This lets the tungsten and carbide particles simply fall off.

Bits cooled by 40 or 20°F air during use lasted 25% longer. Those cryogenically treated worked 65% longer. And bits pretreated and then cooled with 40°F air lasted 85% longer, while 20°F air let tools operate 217% longer. Cryogenic treatments involves cooling tools to –300°F, then bringing them back to ambient, a process that can cost just a few dollars per pound of tools, which should be feasible for toolmakers.

Sponsored Recommendations

June 27, 2025
Ensure workplace safety and compliance with our comprehensive Lockout/Tagout (LOTO) Safety Training course. Learn critical procedures to prevent serious injuries.
June 27, 2025
Join our expert webinar to discover essential safety control measures and best practices for engineering a truly safe and compliant industrial environment.
June 25, 2025
An innovative aircraft with electric drives combines the best of both worlds. The cross between drone and helicopter could mean significantly faster and more efficient air emergency...
June 25, 2025
Effective when other materials fail, ceramics are particularly suitable for applications requiring wear and chemical resistance, sliding characteristics or biocompatibility. Discover...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!