Impact modifier for PLA - Poly One

June 4, 2011
The impact modifier works in injection-molding operations.

OnCap BIO L masterbatches are based on Dow PARALOID BPM-520 impact modifier for opaque, injection-molded polylactic acid (PLA) products. The additive boosts impact strength at room and subzero temperatures in PLA and PLA/PC blends. The additive has good flow properties, maintains part stiffness, and is colorable with an attractive surface finish. The additive complies with European Commission Regulation (EU) No 10/2011 and US Food and Drug Administration (FDA) requirements for food contact.

PolyOne Corp., 33587 Walker Rd., Avon Lake, OH 44012, (440) 930-1000, www.polyone.com

About the Author

Jessica Shapiro

Jessica serves as Associate Editor - 3 years service, M.S. Mechanical Engineering, Drexel University.

Work experience: Materials engineer, The Boeing Company; Primary editor for mechanical and fastening & joining.

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!