Content Why Frictionless Air Bearings Enable Precise Force Control & Position Control Applications Motion control systems, which typically control the position of stage or actuator, are sometimes tasked to provide both position and force control. These systems work in a dual mode, where the motion controller either controls the position or the force applied. In force-control mode, the motion stage must apply a controlled force while the position can vary. In position control mode, the stage position is controlled via closed-loop servo, using a position encoder as feedback. When coupled with a direct-drive linear motor, the lack of friction in an air bearing means that the driving system (motor, controller, drive) can transduce electrical current directly into applied force. The absence of friction in the bearing means that no parasitic forces are present, and force can be directly controlled via the closed-loop servo, without the need for an external force sensor. The amount of force that can be applied is a function of the available power in the motor and drive system. The precision and resolution to which force can be controlled is a function of the motion control system fidelity and bandwidth. Force can be applied in either vertical or horizontal directions. In the case of vertical motion, a counterbalance system is required. The counterbalance system must be designed to be friction-free, so no parasitic friction is introduced into the system. In a typical force control application, the linear actuator or stage must be moved into a position very close to the point at which the stage and the target substrate come into contact. The motion controller dynamically switches to force control mode (without losing servo lock) and moves the stage until a target force is reached. The control system can then maintain a constant force or vary the force to follow a programmed profile. In this mode, the stage’s position is allowed to move freely while the applied force is controlled. Common applications for force control include: polishing of flat or non-flat surfaces micro-machining brake friction testing assembly operations where a force must be applied during a weld or bond operation touch-screen sensitivity testing durability and life cycle testing of touch interfaces and push-button components The precision and repeatability levels to which the applied force can be controlled will vary system by system. PI has built several custom air bearing actuator systems where forces as small as 0.5N can be controlled with an accuracy and repeatability of better than +/-0.02N. Highly repeatable force control: PI has experience with air bearings and force control down to the 0.5N range with accuracy and repeatability of better than +/-0.02N. Stability: Constant force can be maintained with little or no drift over long periods of time. Sign up to receive an email of new blog posts. First Name* Last Name* Company / Organization City* State* Country* Email* Please read the following and confirm your consent to the processing of your data. By submitting this form, you consent to the PI Group contacting you through the communication channels you specify. Additionally, you acknowledge that the PI Group may store, process, and analyze the necessary data. For further information, see our >> Privacy Policy . Each email includes an unsubscribe link that allows you to withdraw your consent. Privacy Policy* I have read the Privacy Policy and agree to its terms and conditions. Submit Blog Categories Compliance with Applicable Laws; Export Control Laws User access to this website is governed by all applicable federal, state, and local laws. All information available on this website is subject to U.S. export control laws and may also be subject to the laws of the country where you reside.