• Resources
  • Members
  • Directory
  • Webinars
  • Video
  • WISE
  • CAD Models
  • EDGE Awards
    1. Archive

    High-Flow Conductive Compounds

    May 19, 2005
    Easy-to-mold conductive polypropylene (PP) compounds have typical melt flows of 20 gm/ 10 min (2,160 gm at 230°C).

    Easy-to-mold conductive polypropylene (PP) compounds have typical melt flows of 20 gm/ 10 min (2,160 gm at 230°C). Maximum surface resistivity is 104 w-cm and volume resistivity is < 25 w. The PPs also resist warping, and have a notched IZOD impact strength of 2.5 ft-lb/in. (133 J/m), and a "no break" unnotched IZOD impact strength. Applications include containers, totes, bins, pipette tips, and explosive handling products for medical, electronic, and biotechnical.

    RTP Co.
    Box 5439, 580 E. Front St.
    Winona, MN 55987
    (507) 454-2041
    rtpcompany.com

    Continue Reading

    Sponsored Recommendations

    Drive systems for urban air mobility

    March 18, 2025
    The shift of some of our transport traffic from the road to the air through urban air mobility is one of the most exciting future fields in the aerospace industry.

    Blazing the trail for flying robots

    March 18, 2025
    Eight Bachelor students built a flying manipulator that can hover in any orientation and grasp objects. The drone is even more maneuverable than a quadrocopter and was designed...

    Reachy 2: The Open-Source Humanoid Robot Redefining Human-Machine Interaction

    March 18, 2025
    Reachy 2 was designed to adapt to a wide variety of uses thanks to its modular architecture.

    maxon IDX: The plug-and-play solution

    March 18, 2025
    IDX drives combine power with small space requirements - a brushless BLDC motor combined with an EPOS4 positioning controller and a gearhead inside a high-quality industrial housing...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!