Heat-Activated Phenolic Tape

    Sept. 1, 2005
    MACtac's MACfilm IF4020 Series heat-activated, dry-film adhesive tape consists of a dry thermosetting adhesive and a 60# SCK release liner.

    The nitrile-phenolic dry-film tape provides permanent adhesion to wet-laid fibers (paper), carbon, and other friction materials used in automotive OEM, heavy equipment, lawn and garden, and industrial applications. MACfilm comes in 1 and 2-mil tapes and can be preapplied in-line to raw materials or converted parts using modest heat-assist lamination (approximately 150°F). Final and complete bonding requires curing for 15 min at 350°F with continuous pressures of 50 to 250 psi.

    Morgan Adhesive Co., 4560 Darrow Rd., Stow, OH 44224, (330) 688-1111, MACtac.com

    Continue Reading

    Sponsored Recommendations

    April 16, 2025
    Clean. Compact. Less heat.
    April 16, 2025
    SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
    March 31, 2025
    Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
    March 31, 2025
    Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!