Motor-Control I/O Module

May 25, 2006
The 750-670 I/O module provides stepper motor and servodrive control in a 12-mm-wide package.

The module supports two pulse output patterns, step/direction or incremental encoder that are configured via a function block in the company's IEC 61131-3 programming tool. An RS-422 interface communicates with the stepper or servodrive, which is controlled by a 0-to-500-kHz variable-output frequency. Two digital inputs can be configured to support such motion signals as start/stop, jog/trip, right/left, reference, next position, end-stop, and master clock.

Wago Corp., N120 W19129 Freistadt Rd., Germantown, WI 53022, (262) 255-6333, wago.us

Sponsored Recommendations

June 27, 2025
Ensure workplace safety and compliance with our comprehensive Lockout/Tagout (LOTO) Safety Training course. Learn critical procedures to prevent serious injuries.
June 27, 2025
Join our expert webinar to discover essential safety control measures and best practices for engineering a truly safe and compliant industrial environment.
June 25, 2025
An innovative aircraft with electric drives combines the best of both worlds. The cross between drone and helicopter could mean significantly faster and more efficient air emergency...
June 25, 2025
Effective when other materials fail, ceramics are particularly suitable for applications requiring wear and chemical resistance, sliding characteristics or biocompatibility. Discover...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!