Low-Pressure Transmitters

Sept. 27, 2007
The AST43LP and AST44LP are hazardous- area-approved low-pressure transmitters constructed of 316L SS wetted materials for compatibility with a wide range of liquids and gases.

Both units measure 0-to-5 and 0-to-15 psi and include … - in. - NPT male and 7/-20 UNF male fittings. They also offer assorted cable lengths with conduit fittings or a Hirschmann DIN 43650A. The AST43LP is UL/cUL 1604 (CSA 213) Class 1 Div. 2 Groups A, B, C, and D listed and is recommended for use in hazardous areas. The AST44LP is intended for intrinsically safe areas. It carries UL/cUL 913 (CSA 157) and is rated for Class 1 Div. 1 Groups C and D when installed with an approved barrier.

American Sensor Technologies Inc., 450 Clark Dr., Mt. Olive, NJ 07828, (973) 448-1901, astsensors.com

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!