Rigid packaging resin

    Oct. 26, 2006
    K-Resin XK44 styrene butadiene copolymer (SBC) is a tough copolymer. It produces parts with low stress-whitening when blended with other styrenic polymers.

    It also retains clarity and toughness when blended with crystal polystyrene or other styrenic copolymers and serves in rigid medical, electronic, personal care, and consumer packaging applications. It reportedly processes easier than other rigid packaging resins, including polyethylene terephthalate (PET) and polyvinyl chloride (PVC). K-Resin XK44 SBC has a low melt temperature of 350 to 425°F and requires no recrystallization. It is also nonhygroscopic, eliminating the need for drying.
    Chevron Phillips Chemical LLC
    For more information visit:
    www.k-resin.com

    Continue Reading

    Sponsored Recommendations

    April 16, 2025
    Clean. Compact. Less heat.
    April 16, 2025
    SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
    March 31, 2025
    Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
    March 31, 2025
    Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!