Archive

Plastic Knobs

Oct. 26, 2006

Inch-size knobs made from blackglass-filled nylon sport a matte finish and zinc-plated steel molded-in hubs.

The face of the boss is square to the bore and made from steel to prevent edges from breaking. The knobs come in metric sizes. They survive service temperatures up to 110°C (230°F) and are tapped or have blind bores. Custom bores, cross pins, and setscrew holes and threads can be requested.

J.W. Winco Inc., 2815 S. Calhoun Rd., New Berlin, WI 53151, (800) 877-8351, jwwinco.com

Continue Reading

Multi-axis load cells measure force and torque in six dimensions

Power and efficiency drive motor selection

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024

Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024

Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024

As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.