New Product: Multiphase stepper controller

Jan. 24, 2008
The multiphase ICD200 stepper controller/driver is a stand-alone system designed to execute trapezoidal and S-curve shape (memorydata) acceleration/ deceleration motion profiles in both two and four-phase stepper motors.

Three operation modes are available: Sensor mode, absolute position mode, and relative position mode. The unit is rated at 1.2 A/phase for unipolar stepper motors and 0.6 A/phase for bipolar motors. Input power is 24 Vdc with power consumption of 36 W. This single-axis integrated system provides 20,000 steps/rev microstepping resolution. An onboard potentiometer lets users easily adjust driver running currents. Up to 15 devices can be daisychained using the RS-485 communication protocol. Input/output interface functions include: Photocoupler inputs, point starting code bits, home search start, immediate stop and direction of rotation, current off, and an alarm output sensor interface option.

Nyden Corp., Subsidiary of Mycom Inc.,
2610-B North First St., San Jose, CA 95134,
(408) 232-7700,
nyden.com

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!