Impact-Resistant Epoxy Cures At 175°F

Sept. 28, 2006
Supreme 3HT-80, a one-component epoxy adhesive cures at 175°F (80°C) in under 30 min.

Impact-Resistant Epoxy Cures At 175°F

Supreme 3HT-80, a one-component epoxy adhesive cures at 175°F (80°C) in under 30 min. It resists impacts, thermal shock, vibrations, and stress fatigue while bonding metals, glass, ceramics, wood, vulcanized rubbers, and most plastics. It resists water, oil, fuels, most organic solvents, and prolonged exposures to temperatures from 100 to 175°F. It is 100% reactive and does not contain any solvents. It comes in half-pint, pint, quart, gallon, and 5-gallon containers. For ease of application, it is also available in cartridge applicators.

Master Bond Inc., 154 Hobart St., Hackensack, NJ 07601, (201) 343-8983,

Sponsored Recommendations

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.


May 15, 2024
Production equipment is expensive and needs to be protected against input abnormalities such as voltage, current, frequency, and phase to stay online and in operation for the ...

Solenoid Valve Mechanics: Understanding Force Balance Equations

May 13, 2024
When evaluating a solenoid valve for a particular application, it is important to ensure that the valve can both remain in state and transition between its de-energized and fully...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!