New Product: DIN-Rail-Mount Power Supply

March 20, 2008
The metal-cased DPP120 and DPP240 Series mount on either a TS35/7.5 or TS35/15 standard DIN rail to provide 120 or 240-W output respectively from an input voltage of 90 to 264 Vac.

The DPP120 has output voltages of 12, 24, or 48 Vdc while the DPP240 produces an output of either 24 or 48 Vdc. Both units have active powerfactor correction for EN61000-3-2 compliance and meet EN55022 Class B radiated and conducted EMI standards. The low ripple and noise outputs are protected against overcurrent and overvoltage conditions. Typical efficiencies can reach 90%. Both models are convection cooled under ambient operating temperatures from 25 to 71°C.

Lambda Americas Inc.,
3055 Del Sol Blvd.
San Diego, CA 92154
(800) 526-2324
lambdapower.com

Sponsored Recommendations

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.

MONITORING RELAYS — TYPES AND APPLICATIONS

May 15, 2024
Production equipment is expensive and needs to be protected against input abnormalities such as voltage, current, frequency, and phase to stay online and in operation for the ...

Solenoid Valve Mechanics: Understanding Force Balance Equations

May 13, 2024
When evaluating a solenoid valve for a particular application, it is important to ensure that the valve can both remain in state and transition between its de-energized and fully...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!