New Product: DIN-Rail-Mount Power Supply

March 20, 2008
The metal-cased DPP120 and DPP240 Series mount on either a TS35/7.5 or TS35/15 standard DIN rail to provide 120 or 240-W output respectively from an input voltage of 90 to 264 Vac.

The DPP120 has output voltages of 12, 24, or 48 Vdc while the DPP240 produces an output of either 24 or 48 Vdc. Both units have active powerfactor correction for EN61000-3-2 compliance and meet EN55022 Class B radiated and conducted EMI standards. The low ripple and noise outputs are protected against overcurrent and overvoltage conditions. Typical efficiencies can reach 90%. Both models are convection cooled under ambient operating temperatures from 25 to 71°C.

Lambda Americas Inc.,
3055 Del Sol Blvd.
San Diego, CA 92154
(800) 526-2324
lambdapower.com

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!