Low-Profile Conveyor

June 7, 2006
Transept TM Series conveyor systems carry unit loads to 500 lb at speeds to 98.5 fpm.

Each shuttle or load carriage contains eight load-bearing wheels and eight side-guide rollers. The design lets a part fixture overhang the shuttle for greater access. The part fixture may also cantilever for easier part manipulation.

A patented dual-drive system gives positive transport throughout line switches, onto lift sections, turntables, and storage loadbanks, for load carriage lengths from 20 to 120 in. Track height is 21 in. from floor to carriage top. An enclosed chain path gives safe operation and propels loads with minimum power consumption.

Northwood Automation, 16055 Northwood Rd., Prior Lake, MN 55372, (612) 209-6122, northwoodautomation.com

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!