Spline shafts with mated bushing - Nordex Inc.

    May 26, 2009
    Lightweight aluminum spline shafts are treated with a proprietary low-friction TFE coating and mated with a graphite and PTFE-filled thermoplastic bushing. The bushing’s integral brass collar facilitates mounting without nut distortion.

    Lightweight aluminum spline shafts are treated with a proprietary low-friction TFE coating and mated with a graphite and PTFE-filled thermoplastic bushing. The bushing’s integral brass collar facilitates mounting without nut distortion.
    Shaft straightness is 0.003 in./ft and typical radial and torsional clearance between the shaft and bushing is 0.002 to 0.003 in. An antibacklash assembly is available for applications requiring additional stiffness.
    Nordex Inc., 426 Federal Rd., Brookfield, CT 06804, (203) 775-4877, www.nordex.com

    Continue Reading

    Sponsored Recommendations

    June 27, 2025
    Ensure workplace safety and compliance with our comprehensive Lockout/Tagout (LOTO) Safety Training course. Learn critical procedures to prevent serious injuries.
    June 27, 2025
    Join our expert webinar to discover essential safety control measures and best practices for engineering a truly safe and compliant industrial environment.
    June 25, 2025
    An innovative aircraft with electric drives combines the best of both worlds. The cross between drone and helicopter could mean significantly faster and more efficient air emergency...
    June 25, 2025
    Effective when other materials fail, ceramics are particularly suitable for applications requiring wear and chemical resistance, sliding characteristics or biocompatibility. Discover...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!