Products

April 1, 2006
Turn steppers into servos SilentStep control software lets stepmotors run like servos by optimizing torque, precision, and noise. FEATURES & BENEFITS

Turn steppers into servos

SilentStep control software lets stepmotors run like servos by optimizing torque, precision, and noise.

FEATURES & BENEFITS

  • Patent-pending software technology

  • Reduces resonance and noise by up to 75%

  • Efficient control technique maximizes torque, eliminating need to over-size motor

AGILE SYSTEMS
Waterloo, Ontario
(519) 886-2000
www.agile-systems.com
Circle 142

Rod end bearings

Self-lubricating rod end bearings come in metric sizes.

FEATURES & BENEFITS

  • Threaded stem or tapped body styles

  • Made of zinc-plated steel (rod end), hardened and ground Cr6 bearing steel (ball socket), and bronze (external ring)

  • Operating temperature range: -30 to 150°C

J. W. WINCO INC.
New Berlin, Wis.
(800) 877-8351
www.jwwinco.com
Circle 143

Magnetostrictive sensors

Miniature C-series sensors feature a flexible shaft to provide precise curvilinear measurements when there is less than 270° of rotation to monitor.

FEATURES & BENEFITS

  • Modular architecture based on core sensor

  • Optional 5 and 12-V supply module supports changing requirements

  • IP67 packaging houses core sensor

MTS SYSTEMS CORP.
Cary, N.C.
(919) 677-2314
www.mtssensors.com
Circle 144

Linear servomotors

P01-48 linear servomotors provide reliable positioning and handling without belts, cams, or gears.

FEATURES & BENEFITS

  • 135 lb peak force

  • 45 G acceleration

  • 175 in./sec speeds

  • 22 models with strokes to 5 ft

  • IP67 connectors rotate for mounting flexibility

LINMOT INC.
Delavan, Wis.
(877) 546-3270
www.linmot.com
Circle 146

Power connectors

Epic LS1 circular and mixed power connectors are available in five styles based on a standard M23 threaded connection housing.

FEATURES & BENEFITS

  • Two contact configurations — 5+PE contacts for power distribution and 3+PE+4 contacts for mixed power — make it possible to connect two flexible cables or one flex cable to fixed machine wiring

  • Offered in male coupler, female connector, and male inlet configurations

  • Rugged nickel-plated zinc body, plastic contact insulation body and sleeve, gold-plated electrical contacts

  • Cable mounted arrangements include EMC shield ring and IP68 clamp and seal

  • Designed to DIN specification EN61984

LAPP USA INC.
Florham Park, N.J.
(888) 456-3539
www.lappusa.com
Circle 145

Brushless dc gearmotor

New 24-V brushless dc gearmotor-brake system develops 145 lb-in. of torque at 72 rpm.

FEATURES & BENEFITS

  • Small size: 2.3 in. (diam.) × 9.2 in. (length)

  • Keyed 12-mm (diam.) output shaft

  • IP 54 protection rating

  • Output torque: 16.4 Nm (continuous)/18 Nm (peak) at 100 rpm

  • Options include optical encoders, analog tachometers, planetary gearheads (3:1 to 450:1), 12 and 36-V windings

MIDWEST MOTION PRODUCTS
Watertown, Minn.
(952) 955-2626
www.midwestmotion.com
Circle 147

Rotary sensor

Non-contact rotary sensor has no moving or mechanical parts, eliminating lifetime and wear concerns.

FEATURES & BENEFITS

  • Embedded, integrated circuit provides analog output from 30° to 360° in 10° steps

  • 12-bit resolution, independent linearity to 0.5% of measurement range, repeatability less than 0.03%

  • Redundant output available with six leads

  • Sealed to IP69

NOVOTECHNIK U.S. INC.
Southborough, Mass.
(508) 485-2244
www.novotechnik.com
Circle 148

Timing belt pulleys

A6D51 series timing belts come in inch and metric sizes for 6 mm (0.236 in.) wide belts.

FEATURES & BENEFITS

  • Made of aluminum with integrated Fairloc hub

  • Tooth pitch: 2 mm; available in sizes from 15 to 120 grooves

  • Bore sizes: 0.1875 to 0.375 in.; 5 to 10 mm

  • OD: 0.356 to 2.988 in.; 9 to 75.9 mm

  • Available in double and no-flange versions

STOCK DRIVE PRODUCTS
New Hyde Park, N.Y.
(516) 328-3300
www.sdp-si.com
Circle 149

High-torque motors

Brushless EC 45 four-pole motor provides high torque without a gearhead.

FEATURES & BENEFITS

  • Four-pole neodymium magnets, electrically commutated, no wearing brushes

  • 45 × 155 mm, 1.13 kg, 200 W output to 10,000 rpm

  • Ambient temperature range from -20° to 100° C

  • Magnets produce responsive mechanical time constant of less than 2 msec

MAXON PRECISION MOTORS INC.
Burlingame, Calif.
(800) 865-7540
www.maxonmotorusa.com
Circle 150

Sponsored Recommendations

From concept to consumption: Optimizing success in food and beverage

April 9, 2024
Identifying opportunities and solutions for plant floor optimization has never been easier. Download our visual guide to quickly and efficiently pinpoint areas for operational...

A closer look at modern design considerations for food and beverage

April 9, 2024
With new and changing safety and hygiene regulations at top of mind, its easy to understand how other crucial aspects of machine design can get pushed aside. Our whitepaper explores...

Cybersecurity and the Medical Manufacturing Industry

April 9, 2024
Learn about medical manufacturing cybersecurity risks, costs, and threats as well as effective cybersecurity strategies and essential solutions.

Condition Monitoring for Energy and Utilities Assets

April 9, 2024
Condition monitoring is an essential element of asset management in the energy and utilities industry. The American oil and gas, water and wastewater, and electrical grid sectors...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!