• Image

    Acid-resistant two-part epoxy - Master Bond Inc.

    Nov. 11, 2010
    The epoxy mixes at 2:1 and cures at room or elevated temperatures.

    EP21ARHT two-component epoxy bonds metals, ceramics, glass, and many plastics and resists chemicals, fuels, and acids including 96-98% sulfuric acid and 20% hydrochloric acid. The epoxy cures at room temperature or elevated temperatures with minimal shrinkage. It has cured bond strength over 2,200 psi and a temperature range of -60 to 400°F. Its dielectric strength is 440 volts/mil, and its low coefficient of thermal expansion is 45x10-6 in/in/°C.
    EP21ARHT mixes by combining two parts clear part A with one part amber part B by weight. It comes in pint, quart, gallon, and 5 gal. container kits.

    Master Bond Inc., 154 Hobart St., Hackensack, NJ 07601, (201) 343-8983, www.masterbond.com

    About the Author

    Jessica Shapiro

    Jessica serves as Associate Editor - 3 years service, M.S. Mechanical Engineering, Drexel University.

    Work experience: Materials engineer, The Boeing Company; Primary editor for mechanical and fastening & joining.

    Continue Reading

    Sponsored Recommendations

    April 16, 2025
    Clean. Compact. Less heat.
    April 16, 2025
    SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
    March 31, 2025
    Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
    March 31, 2025
    Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!