Cryogenic Epoxy for Wind-Tunnel Bonding Aapplications

Sept. 8, 2009
The EP21TCHT-1 two-part cryogenic epoxy adhesive is for the assembly of difficult-to-bond substrates used in state-of-the-art wind tunnels.

The EP21TCHT-1 two-part cryogenic epoxy adhesive is for the assembly of difficult-to-bond substrates used in state-of-the-art wind tunnels. The epoxy has a 2,200-psi shear bond strength at ambient temperatures up to 400°F and low-temperature cryogenic environments down to 4°K. The bonds are resistant to thermal cycling and many chemicals. The high thermal conductivity of the hardened adhesive is useful in the tunnel’s overall temperature cycling performance.

Master Bond Inc.
154 Hobart St,
Hackensack, NJ 07601
(201) 343-2132
www.masterbond.com

Sponsored Recommendations

June 27, 2025
Ensure workplace safety and compliance with our comprehensive Lockout/Tagout (LOTO) Safety Training course. Learn critical procedures to prevent serious injuries.
June 27, 2025
Join our expert webinar to discover essential safety control measures and best practices for engineering a truly safe and compliant industrial environment.
June 25, 2025
An innovative aircraft with electric drives combines the best of both worlds. The cross between drone and helicopter could mean significantly faster and more efficient air emergency...
June 25, 2025
Effective when other materials fail, ceramics are particularly suitable for applications requiring wear and chemical resistance, sliding characteristics or biocompatibility. Discover...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!