Universal joints

Oct. 25, 2007
Universal joints, including needle roller U-joints with sealed bearings, meet DIN 808-W and have little backlash.

Single and double types come in 9SMn Pb36k steel. Outside diameters range from 20 to 95 mm. While lengths vary from 88 to 290 m. Options include smaller bores, keyways, square and hexagon bores, shorter lengths, and quick-release types. Hardened-steel pin types meet DIN 808-G and need lubrication. The manufacturer recommends PVC rubber covers filled with grease or highspeed, angle-forced oil lubrication for adverse conditions. Steel joints meet DIN 808-G & W. A hand-operated telescopic joint comes with unhardened pins.

Ondrives Ltd., Foxwood Industrial Park, Foxwood Rd., Chesterfield, Derbyshire S41 9RN, UK, Tel: 00 44 1246 455500, E-mail: [email protected], ondrives.com

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!