mdwhitepaper.jpg

Ins and Outs of I/P Transducers

Jan. 28, 2017
Sponsored by Control Air
I/P and E/P transducers are used to regulate air pressure in many different types of processes and equipment.  The very basic use for an electro-pneumatic transducer is to convert an electronic signal into a correlating output pressure (I/P-Current to Pressure or E/P-Voltage to Pressure).  Some of the topics covered are how performance and output are affected by media, actuator type, supply pressure, and transducer orientation.  Other topics such as how to calibrate and trouble shoot these are units are covered as well. The following white paper can be used as a reference for basic I/P pressure transducer operation, build and terminology.

Sponsored Recommendations

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.

MONITORING RELAYS — TYPES AND APPLICATIONS

May 15, 2024
Production equipment is expensive and needs to be protected against input abnormalities such as voltage, current, frequency, and phase to stay online and in operation for the ...

Solenoid Valve Mechanics: Understanding Force Balance Equations

May 13, 2024
When evaluating a solenoid valve for a particular application, it is important to ensure that the valve can both remain in state and transition between its de-energized and fully...