Analyst say Revenues for Stepper-Motor Sales will Fall then Start Climbing in 2010

July 21, 2009
Analyst say revenues for stepper-motor sales will fall then start climbing in 2010.

IMS Research, www.imsresearch.com

Worldwide sales of stepper motors continued a low, single-digit growth rate through 2008, pushing revenues for stepper motors to $987.1 million. Key industry sectors for steppers were the medical and scientific, and food, beverage, and tobacco areas, according to analysts at IMS Research, Austin, Tex. But the global recession has hurt revenues in the last half of 2008 and the first half of 2009, with experts predicting an overall 3.9% drop in revenues for 2009.

Western Europe has become the largest regional market, thanks to the many machine builders based there. That region now accounts for one-third of all stepper revenues. But even that market will suffer this year as it sees revenues drop an estimated 2%. America and Japanese markets, which if combined, would represent the largest steppermotor market, will see revenues decrease 4.2% and 6.7%, respectively.

Overall, growth in the medical and scientific, food, beverage, and tobacco, and renewable energy sectors should help offset declines in the semiconductor, printing, and electronics industries. IMS expects growth to return in 2010 but says conditions could depend on government “stimulus” packages.

IMS also surveyed Chinese firms that purchase motor drives. Three out of the five most popular drive brands in the survey were from European manufacturers; ABB, Siemens, and Schneider. They accounted for 45% of all responses. Mitsubishi and Fuji, both of Japan, rounded out the top five with a combined 15% of the market. The remaining 40% of the market was divided among between 22 companies. The survey also revealed that respondents tended to think of Asian drive makers as turning out less-expensive drives, while European firms were thought of as industry experts offering premium quality goods.

Sponsored Recommendations

Drive systems for urban air mobility

March 18, 2025
The shift of some of our transport traffic from the road to the air through urban air mobility is one of the most exciting future fields in the aerospace industry.

Blazing the trail for flying robots

March 18, 2025
Eight Bachelor students built a flying manipulator that can hover in any orientation and grasp objects. The drone is even more maneuverable than a quadrocopter and was designed...

Reachy 2: The Open-Source Humanoid Robot Redefining Human-Machine Interaction

March 18, 2025
Reachy 2 was designed to adapt to a wide variety of uses thanks to its modular architecture.

maxon IDX: The plug-and-play solution

March 18, 2025
IDX drives combine power with small space requirements - a brushless BLDC motor combined with an EPOS4 positioning controller and a gearhead inside a high-quality industrial housing...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!