Using the sun to disinfect water

Nov. 3, 2011
Engineers discovers way to disinfect water using sunlight

Resources:
Purdue University

A team of engineers at Purdue University has built a prototype of a machine that disinfects water using UV radiation from the sun, a potential boon for the world’s 800 million people who lack access to safe drinking water. The UV radiation inactivates waterborne germs by damaging them so they cannot reproduce. The device consists of a parabolic reflector with a transparent pipe running down the middle. Water flowing through the pipe gets exposed to the sun’s radiation during the day.

The trough-shaped reflector was made by lead engineer Ernest R. Blatchely III in his garage. To make the reflector reflective, the team lined it with aluminum foil. The trough itself is made of paulownia wood from a tree that grows rapidly in equatorial regions, an area which often doesn’t have sources of clean water. The wood is light, strong, and stable, so it will not warp, twist, or crack in climates that are either dry or humid, or those that swing back and forth between the two.

In tests at the college’s Indiana campus, the $100 device worked against E. coli bacteria, but not against the germs that cause cholera, typhoid, or cryptosporidiosis. The team plans on testing other, more-reflective materials such as metallized plastics, similar to the materials used to package potato chips. Such materials are said to be twice as reflective as aluminum foil. The team will also automate the process, adding timers and valves so they can control how fast water speeds through the pipe and how long it’s exposed to sunlight. Plans are to determine how much exposure to tropical sunlight is needed to inactivate the target pathogens, and then to program the timers accordingly.

© 2011 Penton Media, Inc.

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024
Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024
Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!