Image

Terrafugia Develops the Transition, a Street-Legal and FAA-Approved Flying Car

Aug. 26, 2010
Terrafugia develops the Transition, a street-legal and FAA-approved flying car
Terrafugia, www.terrafugia.com

The Transition, a flying car from Terrafugia, Woburn. Mass., is scheduled to go on sale late next year, making it the first FAA-approved and street-legal “flying car” to hit the market. The 1,440-lb aircraft needed a waiver from the FAA, however, to let it qualify as a light sport craft despite being 120 lb over the limit for such an aircraft.

Management from the Terrafugia convinced the FAA that not all mandated safety equipment would fit into the car — air bags, crumple zones, and roll cage — without going over the limit. This means owners will only need about 20 hr of flight time, along with ground school, to qualify as pilots. Of course, the light sport craft designation also limits the plane. It must fly below 10,000 ft, at less than 100 knots, and only during VFR conditions (i.e., clear skies, daylight hours, and no inclement weather).

In flight, the two-seat Transition can cruise at 115 mph, travel up to 460 miles on a single tank of fuel (20 gallons), and carry 450 lb, thanks to its Rotax engine. The four-cylinder, four-stroke, liquid-cooled engine generates about 100 hp.

The Transition can take off or land on a 2,500-ft runway. Once on the ground, flipping a switch activates the electromechanical wings, folding them at the root and midspan within 30 sec, making it compact enough to fit in a standard garage. The same Rotax engine powers the front-wheel-drive vehicle on the ground and lets it get 30 mpg. The vehicle is legal for driving on U. S. streets.

The company claims to have orders, including $10k deposits, from 70 customers. Total price on the Transition is $194,000. The company plans to manufacture between 300 and 400 Transitions annually.

© 2010 Penton Media, Inc.

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!