Hinge and screw-cover enclosures

April 27, 2012
The Hoffman brand Zonex IECEX and ATEX-certified hinge and screw-cover enclosures are for use in applications requiring protection of electrical components

The Hoffman brand Zonex IECEX and ATEX-certified hinge and screw-cover enclosures are for use in applications requiring protection of electrical components. The enclosures are not intended for use in flame or explosionproof applications.

New inch-based offerings extend the range of sizes, including the hinge and screw-cover versions. All models are now offered with numerous customization options.

New inch-dimensioned hinge-cover enclosures come in sixteen sizes — 12 × 12 × 6 in. to 36 × 24 × 8 in. The units also feature NEMA-style mounting feet on the top and bottom, a full-size bottom gland plate, and a one-piece continuous gasket on the door and gland plate. Hinge cover models feature 10-mm brass internal/external bonding; a quarter- turn latch with a 3-mm double bit insert; and required panel and bonding hardware. Side-mount brackets, a hightemperature silicon gasket, gland-plate changes from zero to four, and enclosure dimension changes up to 60 × 36 × 18 in. are available.

Screw cover enclosures come in five sizes ranging from 4 × 4 × 3 in. to 10 × 10 × 5 in. Features include welded-on, full-width top and bottom wall-mount brackets; 6-mm internal/external brass bonding; stainless-steel cover screws; a one-piece continuous gasket, and required panel and bonding hardware.

Pentair Technical Products
2100 Hoffman Way
Anoka, MN 55303
(763) 421-2240
www.pentair.com

© 2012 Penton Media, Inc.

Sponsored Recommendations

Drive systems for urban air mobility

March 18, 2025
The shift of some of our transport traffic from the road to the air through urban air mobility is one of the most exciting future fields in the aerospace industry.

Blazing the trail for flying robots

March 18, 2025
Eight Bachelor students built a flying manipulator that can hover in any orientation and grasp objects. The drone is even more maneuverable than a quadrocopter and was designed...

Reachy 2: The Open-Source Humanoid Robot Redefining Human-Machine Interaction

March 18, 2025
Reachy 2 was designed to adapt to a wide variety of uses thanks to its modular architecture.

maxon IDX: The plug-and-play solution

March 18, 2025
IDX drives combine power with small space requirements - a brushless BLDC motor combined with an EPOS4 positioning controller and a gearhead inside a high-quality industrial housing...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!