Shims

June 14, 2012
Shims, used to achieve uniform spacing or fill space between mismatched components, are available in numerous sizes and materials. The shims can be custom made, with ODs ranging from 0.080 to 12 in. and in thicknesses from 0.005 to 0.134 in

Shims, used to achieve uniform spacing or fill space between mismatched components, are available in numerous sizes and materials. The shims can be custom made, with ODs ranging from 0.080 to 12 in. and in thicknesses from 0.005 to 0.134 in. Shims are available in over 2,000 commonly specified and difficultto- find materials. Metallics include low-carbon sheet steel, various spring steels, stainless steel, aluminum, brass, copper and nickel silver. Nonmetallic versions include ABS, acetal, polyester, nylon, nylon MD, polycarbonate, fiber, polyethylene and various NEMAgrade laminates.
 

Boker’s Inc.
3104 Snelling Ave.
Minneapolis, MN 55406
(800) 927-4377

© 2012 Penton Media, Inc.

Sponsored Recommendations

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.

MONITORING RELAYS — TYPES AND APPLICATIONS

May 15, 2024
Production equipment is expensive and needs to be protected against input abnormalities such as voltage, current, frequency, and phase to stay online and in operation for the ...

Solenoid Valve Mechanics: Understanding Force Balance Equations

May 13, 2024
When evaluating a solenoid valve for a particular application, it is important to ensure that the valve can both remain in state and transition between its de-energized and fully...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!