Adjustable and Fixed-Setpoint Flowswitches

Sept. 27, 2007
Adjustable and fixedsetpoint flowswitches work in pressures ranging from 1,000 to 5,000 psig and come in both low-flow and high-flow models.

Adjustable lowflow models have a fixed-orifice range of 0-to-2 through 0-to-40 GPH (liquid) and 1.5-to-5 scfm (gas). Highflow models have a variable orifice for flows from 0-to-1 through 0-to-30 gpn (liquid) and 1-to-100 scfm (gas). Both low and high-flow adjustable models have optional dials for local readout and handle pressures to 5,000 psig. The fixed-setpoint flowswitches target applications where simple flowswitch operation is required. It comes in six factory-preset steps from 0.1 to 1.5 gpm.

Orange Research Inc., 140 Cascade Blvd., Milford, CT 06460, (800) 989- 5657, orangeresearch.com

Sponsored Recommendations

April 16, 2025
Clean. Compact. Less heat.
April 16, 2025
SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
March 31, 2025
Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
March 31, 2025
Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!