Archive

Compact 1.5-A Servodriver

June 2, 2005

The EZSV10 dc brush servodriver measures just 0.95 1.4 0.6 in. and requires little or no tuning when used with motors measuring less than 1.5 in. in diameter.

Staff

Up to 16 dc motors can be daisychained simultaneously with a single four-wire bus. The controller accepts high-level commands from a serial port to control motors at 1.5 A continuously, 2 A peak. The EZSV10 is capable of stand-alone or PCcontrolled operation. Applications include medical, scientific, optical, and generation automation.

AllMotion Inc.
5501 Del Oro Court
San Jose, CA 95124
(408) 460-1345
allmotion.com

Continue Reading

Multi-axis load cells measure force and torque in six dimensions

Power and efficiency drive motor selection

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024

Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024

Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024

As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.