Archive

UV-Curing Surface Masks

Sept. 14, 2006

Temporary metal masking resins in the Speedmax 7100 Series protect orthopedic implants, hardware, surgical instruments, and medical devices during finishing operations.

Staff

The resin UV cures in seconds and has a range of adhesion options depending on removal needs. Peelable grades remove easily at room temperature or after soak in 120°F water. Water-soluble masks wash off with water sprays or agitated baths at 140 to 180°F. Masks leave no toxic residues and biocompatible grades are available.

Dymax Corp., 51 Greenswoods Rd., Torrington, CT 06790, (877) 396-2988, dymax.com

Continue Reading

Multi-axis load cells measure force and torque in six dimensions

Power and efficiency drive motor selection

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024

Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024

Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024

As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.