In Person with “Olli,” Your New Autonomous Vehicle Valet

Sept. 14, 2016
This year at the International Manufacturing and Technology Show (IMTS) 2016, Local Motors had a hit on their hands with Olli...
Olli is a 3D-printed autonomous vehicle designed to help ease the traffic and congestion of dense urban areas.

This year at the International Manufacturing and Technology Show (IMTS) 2016, Local Motors had a hit on their hands with Olli. My editor-in-chief Nancy Friedrich and I approached the company display and saw the line that had formed. These people were anxiously waiting to take their turn to ride Olli, Local Motors’ new autonomous vehicle. IMTS had set up the bottom portion of the North Building to be a track for Olli to ride around and show off its autonomous skill.

Machine Design Editor-In-Chief Nancy Friedrich stepping on board Olli for a test ride.

Nancy and I stepped into Olli and went on a drive of its pre-programmed route. For purposes of  the show and due to the lack of GPS inside the building, the drive was semiautonomous. This means that the vehicle was driven once around its route and then programmed to repeat the same route. The ride was smooth, handling turns and the obstacles placed in its path with ease. Inside the vehicle there was space for six people seated and plenty of standing room left for car-pooling trips. The vehicle maintained a low speed and personally it was a comfortable ride. You forget that no one is at the helm of the vehicle. Once outside of the vehicle, it went on its next run and I stepped into the path of the vehicle. It stopped automatically, waited for me to clear the path, and slowly started driving again until it reached its top programmed speed.

Adam Kress, director of public relations for Local Motors, described to us their future plans for Olli. They plan to introduce it into dense urban areas. This could be from major cities like Chicago or New York, to college campuses and amusement parks. With the technology built into Olli, one could call upon Olli to pick them up. An integrated mobile app can be used to call Olli and track its current location. The vehicle has built-in GPS that can be used for it to travel from point A to point B. Using LIDAR technology along with short- and long-range sensors, Olli can navigate its surroundings. Inside and outside cameras transmit video back to a security location to monitor the conditions inside and outside. Olli is made of an aluminum chassis with carbon-fiber body panels, along with several 3D-printed parts, including the wheel wells, fenders, and interior kick panels. The pilot programs for Olli are set to launch at the University of Las Vegas, Maimi-Dade County, Washington D.C., and Denmark.

Local Motors has a history at IMTS making splashes with its concept vehicles, including its 3D-printed vehicle Strati (top photo), its 3D-printed electric highway-car concept LM3D Swim (above, background), and the Rally Fighter from IMTS 2012 (above, foreground) built right on the show floor.

This is not Local Motors’ first time in the spotlight at IMTS. Back in 2012, the company unveiled the Rally Fighter, which was built right on the floor of IMTS. This highlighted the strength of its micro-factories and being able to build efficiently. In 2014, it showcased Strati, a 3D-printed car. Using 3D printing techniques and additive manufacturing, Local Motors was able to construct an entire vehicle in under 48 hours. Then in 2015, it built the world’s first 3D-printed highway-capable concept vehicle, the LM3D Swim. Building on top of the frame of a BMW i3, the interior and exterior are 3D printed. The vehicle itself is also 100% electric, rear-wheel drive, automatic single-speed transmission, with a range of 100 miles, and a top speed of 50 mph. Entering the fray of American car manufacturing is a challenge. Considering all the heavy players in the field, Local Motors is pushing the envelope embracing the emerging technologies of today like 3D printing and self-driving vehicles. 

Sponsored Recommendations

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.


May 15, 2024
Production equipment is expensive and needs to be protected against input abnormalities such as voltage, current, frequency, and phase to stay online and in operation for the ...

Solenoid Valve Mechanics: Understanding Force Balance Equations

May 13, 2024
When evaluating a solenoid valve for a particular application, it is important to ensure that the valve can both remain in state and transition between its de-energized and fully...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!