Wow. Audio tape of the King Air flight after the pilot died at the controls

April 21, 2009
Here is what a hair-raising situation sounds like. The FAA has released tapes of the conversations between air traffic controllers and the private pilot who successfully landed a twin-engine King Air in Florida recently after the pilot died at the ...

Here is what a hair-raising situation sounds like. The FAA has released tapes of the conversations between air traffic controllers and the private pilot who successfully landed a twin-engine King Air in Florida recently after the pilot died at the controls. This tape covers the first 14 minutes of radio calls. Here it is:

http://ms2.naplesnews.com/npdn/content/static/pilot.mp3">

http://ms2.naplesnews.com/npdn/content/static/pilot.mp3

About the Author

Lee Teschler | Editor

Leland was Editor-in-Chief of Machine Design. He has 34 years of Service and holds a B.S. Engineering from the University of Michigan, a B.S. Electrical Engineering from the University of Michigan;, and a MBA from Cleveland State University. Prior to joining Penton, Lee worked as a Communications design engineer for the U.S. Government.

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024
Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024
Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!