pry-promo.gif

What’s the Difference Between Pitch, Roll, and Yaw?

June 12, 2014
Vehicles that are free to operate in three dimensions, such as aircraft and submarines, can change their attitude and rotation about the three orthogonal axes centered on the vehicle’s center of gravity — the longitudinal, vertical, and horizontal axes. Motion about the longitudinal axis is termed roll and in aircraft determines how much the wings are banked. Motion about the perpendicular axes is called yaw and for aircraft it determines which way the nose is pointed.

Download this article in .PDF format

Vehicles that are free to operate in three dimensions, such as aircraft and submarines, can change their attitude and rotation about the three orthogonal axes centered on the vehicle’s center of gravity — the longitudinal, vertical, and horizontal axes. Motion about the longitudinal axis is termed roll and in aircraft determines how much the wings are banked. Motion about the perpendicular axes is called yaw and for aircraft it determines which way the nose is pointed. (Note: Aircraft do not necessarily fly in the same direction as the nose is pointed if there are significant winds.) Motion about the lateral axis is called pitch and it’s a measure of how far an airplane’s nose is tilted up or down.

Cars also experience pitch, roll, and yaw, but the amounts are relatively small and are usually the result of the suspension reacting to turns, accelerations, and road conditions.

Sponsored Recommendations

The Digital Thread: End-to-End Data-Driven Manufacturing

May 1, 2024
Creating a Digital Thread by harnessing end-to-end manufacturing data is providing unprecedented opportunities to create efficiencies in the world of manufacturing.

Medical Device Manufacturing and Biocompatible Materials

May 1, 2024
Learn about the critical importance of biocompatible materials in medical device manufacturing, emphasizing the stringent regulations and complex considerations involved in ensuring...

VICIS Case Study

May 1, 2024
The team at VICIS turned to SyBridge and Carbon in order to design and manufacture protective helmet pads, leveraging the digitization and customization expertise of Toolkit3D...

What's Next for Additive Manufacturing?

May 1, 2024
From larger, faster 3D printers to more sustainable materials, discover several of the top additive manufacturing trends for 2023 and beyond.

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!