Fast-Curing Liquid Silicone

Jan. 26, 2006
The Keg2000 Series of liquid-injectionmolding silicone is FDA and USP Class VI compliant.

The silicones have hardnesses of 45 to 75 Shore A. The Series features dynamic viscosity. So under low-shear stress (during the pumping and shut-off stages of molding), the silicones have high viscosity. But under high shear stress (during injection), viscosity is low. This lets molders produce parts faster and with less flash. The silicone can be used with both open and closed-nozzle cold runner systems.

Shincor Silicones Inc., 1030 Evans Ave., Akron, OH 44305, (330) 630-9460,

Sponsored Recommendations

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024
As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.

The entire spectrum of drive technology

June 5, 2024
Read exciting stories about all aspects of maxon drive technology in our magazine.


May 15, 2024
Production equipment is expensive and needs to be protected against input abnormalities such as voltage, current, frequency, and phase to stay online and in operation for the ...

Solenoid Valve Mechanics: Understanding Force Balance Equations

May 13, 2024
When evaluating a solenoid valve for a particular application, it is important to ensure that the valve can both remain in state and transition between its de-energized and fully...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!