Archive

New Product: Stainless-Steel Couplings

Dec. 13, 2007

The 17-4PH stainless-steel couplings offer higher torque capacity and torsional stiffness with two sets of flexures for increased parallel offset.

Three series are available: the W Series (metric) accommodates shaft sizes from 3 to 20 mm, the MC Series from 0.16 to 1.75 in., and the H Series from 0.06 to 0.75 in. All three series are capable of transmitting torque through 5° if required and can operate in temperatures up to 600°F (300°C).

Helical Products Co. Inc., Box 1069, Santa Maria, CA 93456, (877) 353-9873, heli-cal.com

Continue Reading

Multi-axis load cells measure force and torque in six dimensions

Power and efficiency drive motor selection

Sponsored Recommendations

How to Build Better Robotics with Integrated Actuators

July 17, 2024

Reese Abouelnasr, a Mechatronics Engineer with Harmonic Drive, answers a few questions about the latest developments in actuators and the design or engineering challenges these...

Crisis averted: How our AI-powered services helped prevent a factory fire

July 10, 2024

Discover how Schneider Electric's services helped a food and beverage manufacturer avoid a factory fire with AI-powered analytics.

Pumps Push the Boundaries of Low Temperature Technology

June 14, 2024

As an integral part of cryotechnology, KNF pumps facilitate scientific advances in cryostats, allowing them to push temperature boundaries and approach absolute zero.