Spooling guide wheels - Amacoil

    Oct. 8, 2010
    The GS Guide System keeps wire or other material being spooled in-line between pay-off and take-up points

    The GS Guide System keeps wire or other material being spooled in-line between pay-off and take-up points using guide wheels attached to modular, adjustable arms. The guide works with Uhing traverse drives KI3-15, RG3-15-2, and RG3-20-2 and non-Uhing traverses. The system may be used with tensioning devices such as dancers, but it does not provide tensioning control itself.
    All metal parts are stainless steel, and the GS guide wheels are composite with ceramic groove linings. Ten sizes of guide wheels accommodate wire diameters from 2 to 8 mm. Guide-wheel arms come in 4.62, 6.89, and 9.21-in. lengths.

    Amacoil, 2100 Bridgewater Rd., Aston, PA 19014, (800) 252-2645, www.amacoil.com

    © 2010 Penton Media, Inc.

    Continue Reading

    Sponsored Recommendations

    April 16, 2025
    Clean. Compact. Less heat.
    April 16, 2025
    SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
    March 31, 2025
    Unlike passive products - made of simple carbon springs - the bionic prostheses developed by Revival Bionics are propulsive, equipped with a motor and an artificial Achilles tendon...
    March 31, 2025
    Electric drives are a key technology for the performance of machines, robots, and power tools. Download this guide for an introduction to high-quality mechatronic drive systems...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!