• Resources
  • Members
  • Directory
  • Webinars
  • Video
  • WISE
  • CAD Models
  • EDGE Awards
    1. Home

    Some math behind the balloon boy story

    Oct. 19, 2009
    http://www.avweb.com/eletter/archives/avflash/1478-full.html#201319 The folks at AVWeb did some back of the envelope calculations about whether it was feasible for a six-year-old to be lifted 8,000 ft by a relatively small helium balloon. Their ...
    http://www.avweb.com/eletter/archives/avflash/1478-full.html#201319

    The folks at AVWeb did some back of the envelope calculations about whether it was feasible for a six-year-old to be lifted 8,000 ft by a relatively small helium balloon. Their conclusion: doubtful. You can see their analysis at the link above.

    About the Author

    Lee Teschler | Editor

    Leland was Editor-in-Chief of Machine Design. He has 34 years of Service and holds a B.S. Engineering from the University of Michigan, a B.S. Electrical Engineering from the University of Michigan;, and a MBA from Cleveland State University. Prior to joining Penton, Lee worked as a Communications design engineer for the U.S. Government.

    Continue Reading

    Sponsored Recommendations

    Drive systems for urban air mobility

    March 18, 2025
    The shift of some of our transport traffic from the road to the air through urban air mobility is one of the most exciting future fields in the aerospace industry.

    Blazing the trail for flying robots

    March 18, 2025
    Eight Bachelor students built a flying manipulator that can hover in any orientation and grasp objects. The drone is even more maneuverable than a quadrocopter and was designed...

    Reachy 2: The Open-Source Humanoid Robot Redefining Human-Machine Interaction

    March 18, 2025
    Reachy 2 was designed to adapt to a wide variety of uses thanks to its modular architecture.

    maxon IDX: The plug-and-play solution

    March 18, 2025
    IDX drives combine power with small space requirements - a brushless BLDC motor combined with an EPOS4 positioning controller and a gearhead inside a high-quality industrial housing...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!