P200 and P290 pneumatic-to-current P/I transducers are designed to convert standard 3-15, 3-27, or 6-30 psig air pressures into a two-wire 4 to 20 or 10 to 50-mA signal with a total accuracy up to ±0.10%. Customized inputs as low as 0 to 20...
CDN-type pneumatic cylinders carry FDA-approved lubricating grease and conform to ISO 6431.
Viscoelastic dampers are an alternative to air cushions.
The new FD67 distributed I/O system is suitable for use in Fieldbus systems such as DeviceNet and Profibus.
Vacuum pumps from nash_elmo Industries llc use a liquid-ring design that moves 20 to 23,000 cfm and generates up to 29-in. HgV.
Pneumatic cylinders put their interior hardware through quite a stress test. To lessen the effects those stresses have on shortening the cylinder's operational life and causing maintenance problems, engineers at Ace Controls Inc. developed...
Smart design can substantially reduce the energy consumption and operating costs for a pneumatic system.
Advances in controls and networks combined with components that pack more punch have opened the door to more-precise, durable, and economical pneumatic systems.
Manifolds for handling corrosive or high-purity gases are often custom-built devices. This makes it difficult to upgrade or change them.